                    QLogic FC-FCoE UEFI Driver 
                          Release Notes

                       QLogic Corporation.
                       All rights reserved. 


Table of Contents

1. Change History
2. Known Issues
3. Notices
4. Contacting Support
 

1. Change History

UEFI Driver:

6.07

* Added support for devices not listed in the flash part table.
  (ER134032)
* Removed flash write-enable check during driver initialization.
  (ER134032)
* Fixed memory leak issue when driver exits due to NVRAM error.
  (ER134032)
* Fixed flash verify error when an EFI driver binary image is flashed.
  The error was not seen with Multiboot images. (ER134032)
* Added EBC compiler fix to 25xx driver. (ER134032)
* Microsoft signed driver.

6.06

* Disabled legacy diagnostics code to reduce image size (ER116392)

6.05

* Updated driver diagnostics to support loopback tests (ER114937)
* Unsigned driver

6.04

* Microsoft signed driver (based on v6.03)

6.03

* Updated driver diagnostics localization check (ER111116)

6.02

* Added Long Range Fibre Channel support. (ER110427)


6.01

* EDKII Successor of older tiano/EDKI driver ver 2.25
* Disabled driver banner display during boot (ER109091)


Efiutil:

3.17

* Add fix for 25xx ver_info command (ER 104543)


3.16

* Removed hardcoded subsystem id check (ER0103883)
* Replaced with MBI image traverse for ssid match (ER0103883)


3.15

* Fixed ambiguity in firmware version display. (ER0103456)


2. Known Issues

* Efiutil does not support the 2.0 Shell.  Please load the 1.0 Shell before
  running Efiutil.
* The FC or FCoE function must be enabled for Efiutil to work.


3. Notices

Information furnished in this document is believed to be accurate and
reliable. However, QLogic Corporation assumes no responsibility for
its use, nor for any infringements of patents or other rights of
third parties which may result from its use. QLogic Corporation
reserves the right to change product specifications at any time
without notice. Applications described in this document for any of
these products are only for illustrative purposes. QLogic Corporation
makes no representation nor warranty that such applications are
suitable for the specified use without further testing or
modification. QLogic Corporation assumes no responsibility for any
errors that may appear in this document.


4. Contacting Support

   For further assistance, contact QLogic Technical Support at:
   http://support.qlogic.com


Trademarks 

Accelera, Accelerating Cluster Performance, InfiniCon Systems, 
InfiniNIC, InfiniPath, InfiniView, QLA, QLogic, the QLogic logo, 
ReadyPath, SANdoctor, SANsurfer, and SilverStorm are registered 
trademarks of QLogic Corporation. All other brand and product names 
are trademarks or registered trademarks of their respective owners. 


(c) Copyright 2014. All rights reserved worldwide. QLogic, the QLogic
logo, and the Powered by QLogic logo are registered trademarks of
QLogic Corporation. All other brand and product names are trademarks
or registered trademarks of their respective owners.


