QLogic FC FCode Release Notes QLogic Corporation. All rights reserved. Table of Contents 1. Change History 2. Known Issues 3. Notices 4. Contacting Support 1. Change History These release notes describe the changes, fixes, known issues, and release details that apply to the FCode for the 25xx Fibre Channel Adapters version 3.23. 1.1. FCode Version History version 3.23 08/29/14 * Fix bug in fp.fth. Add missing SUN methods: read-block-ext64 & rw-blocks64. These methods add 64-bit LBA support. This bug only present in SUN qlc Fcode version 3.22 03/03/14 * Fix bug in retry? method. It was not retring Queue Full 28 status. * Fix bug in set-flt-ofs method. With no EFI image, got FLT Locator not found. * Change all Copyright messages from 2013 to 2014. * Fix login-device to Logout-device when login timesout(sub-cmd 4). * Created NPort-Header buffer, nph-buf. Allows skipping invalid NPHs. * Added Multiflash Version display in show-settings. version 3.21 09/27/13 * ER111573 Rename & edit FC_FcodeReadme_SPARC.txt to 4G_8G_Schultz_FCode_RM.txt. * ER106030 & ER106083. Fix spelling errors in Readme and Release-notes files. * Replace literals with constants for aen-int(x12) and rspq-int(x13). * Fix old bug in get-port-db for debug message 'Port-DB cmd failed - phandl='. version 3.20 01/11/13 * ER102374: Display Product-ID string in VPD area during initial selection. * ER94574: Fix stack bug in .adatper-info, found in blade hotplug test by efcode version 3.19 04/09/12 * Add check for MBAR2 (Multi-Queue memory) and create reg property if it exists. version 3.18 03/30/12 * Make validate-nvram silent. Print messages only if debug-flash?(x1000) is set. * Added dynamic sizing of the BAR registers at probe-time for reg property. * Remove dis-exp (disable-exprom) in ena-reg-acc. Causes problem on SPARC T3-1B. * Fix bugs in search of Card-Type-Lists for SSDID when flashing w/find-ilt-code. * Change oem property to QLogic or Oracle, and manufacture property to QLogic. version 3.17 12/01/11 * Added SSDID check to set-edc-config. Print Not supported message if not Guppy. * Stripped ISP2400 & SUN specific code using #ifdefs to reduce IBM size by .5KB * Added EDC FW area in Flash and added write-sfp and read-sfp mailbox commands * Added set-edc-config, edc-update?, and edc-present! words to nvram.fth.(IBM) * Added check-edc-load and load-edc-fw words to init-isp.fth for Guppy.(IBM) version 3.16 09/30/11 * Change PCI-Cmd-Reg value, pci-cmdv, to x146. Add System Error Resp Enable. * Change MBAR0 size (/regs) from x1000 to x4000 to include MSI-X table. * Add setting Prefetchable bit if enabled for MBAR0 in map-ifp-regs(read-bar). * Fix close-hardware to logout-devices if Link-up?, not done-fw-init? flag. * Add "Problem fixed" printout when validate-nvram fixes the backup copy. * Change init-image & init-fw to return error? flag on stack so you can abort. * Fix all mboxs commands to write 0 to all mboxes used by FW, don't assume =0. * Add clr-flags after a wait-for-risc-int timeout, which will restart the FW. * Change all Copyright messages to: "Copyright 1999-2011". * Change mbox-test to actually do some pattern testing and compare data. * Added 31 second SW timeout for IOCB & mailbox commands in wait-for-risc-int. * Add retry SCSI command once if IOCB timeout & 8048 Recv. error AEN received. * Fix stop-fw mailbox command. Clear Bit 1 (Transition to ROM Code) in Mbox-1. * Utility/Debug changes 1 Change version method for INIT only version to also show FW version. 2 Change find-ilt-code to check Chip-Rev & Card-Type-List in ILT header search 3 Change ilt-valid? to check for Signature Word "QILT" and ILT veersion field 4 Add "Load Raw FW image?" prompt and max-FW-code-size check to ldfw method. 5 Add debug? option debug-probe? (x10000) to disable card access during probe. 6 Fix bug in flash utility which was not setting my_did if the FLT is invalid. version 3.15 09/29/10 * Utility/Debug changes 1 Add debug? flag: 8000= Dump all mailboxes on all AENs and all Mbox commands. 2 Fix problem in ldfcode Flash utility. INIT version was not setting my_did. * Boot-wait-time related changes 1 Change boot-wait-time back to v3.12. Now link-down-to will wait if enabled. 2 Change device-present? to exit immediately if the link-up? flag is not true. 3 Fix show-children to not use boot-wait-time for link-down-to timeout value. 4 Fix device-present? to not restart BW-timer. Start-time set in isp-fw-ready?. version 3.14 04/30/10 * Change validate-nvram to compare only the NVRAM area, not the entire sector. * Change makefile to used the DID variable for the File name & in PCI header. version 3.13 03/26/10 * Remove Hard-RICS-reset from reset-risc method & add 100ms delay after reset. * Make old-sb (old sec-buf) an instance value. Problem on M3000 (ER70453). * Fix Explicit logout-device IOCB to include the ISP PortID and Port WWN. * Change login-devices to not logout with FC_Initiators. * Boot-wait-time related changes * Change get-to-params to set boot-wt = 8 secs if boot-wait-time is disabled. * Change set-boot-wait-time to not affect link-down-to (timeout) for Fujitsu. * Change set-boot-wait-time to be entered/display in decimal, not hex(Fujitsu). * Additions made for debugging: 1 Changed debug? flags: 4000= Got-R2H-intr, 2000= IOCB-Dump, 800=FW-Ready-wait 2 Add Parameter 1 debug display on login IOCB faliure. 3 Add force-open-ok? test flag in open method. Default = true(no real change). * Changes to make process and Flash utilities: 1 Use OpenBIOS Toke Tokenizer to make isp2500. 2 Add Sun-Style-Checksum option OpenBIOS Toke for SUN isp2500. Version 3.12 01/11/10 * Fixed sunid (SUNW,qlc) for the SUN CNA QLE8142. The SSDID is 183, not 182. * Add flashing support for mpi-config-image from Image-Layout-Table(ILT) File. * Add check for Card-Type & Swap bits in Image-Layout-Table(ILT) Flash utility. Version 3.11 12/11/09 * Add support for Sun (SUNW,qlc) CNA QEM8152. Version 3.10 12/02/09 * Add support for Sun (SUNW,qlc) CNAs QLE8140, QlE8142, QLE8150, & QLE8152. Version 3.09 * Fix Node-Name-Option bit preservation in restore-default-settings. Version 3.08 * Fix default WWNN & WWPN preservation in restore-default-settings. * Add standard properties. Use m4 utility to automaticly create date string. * Add file rev_level.m4 which has the revision level strings only. * Change messages "Login failed" to "Login Abort". "Error Subcode" to "Subcode". * Remove patch of PCI header image size byte at offset 0x2c from init version. Version 3.07 * Fix read-cap16-cmd. Used when the LUN size is >2TB (i.e. #blocks > 32-bits). * Fix disk-test to work with large (>2TB) LUNs, where the LBA > 32-bits. * Remove command retry when 8048 AEN is received. Version 3.06 * Add option for qlgc-debug? in nvramrc. If the diag-switch? is true, then the debug? flag is set is set to the value of qlgc-debug?. * Add lba64 large disk capability (read-blocks64 write-blocks64) for SUN only. * Add mbox1 & mbox2 display for 8048 interrupt if debug-asyc? flag (01) is on. * Add more IOCB debugging, Add Erase Response-Queue in mapmem. Had stale data. * Add more debugging for IOCBs, dma-map-in/out, & wait-for-interrupts. Version 3.05 * Re-structure devicepresent.fth. Add set-phandle to set obp-target & obp-portid * Fix multiple close issue found with IBM ioinfo utility. Version 3.04 * Add alloc-sec-buf & free-sec-buf words with debugging messages. * Removed VPD validation from validate-nvram due to bug in update utilities. Version 3.03 * Change validate-nvram to check both FC ports on Dual-port CNAs at probe time. * Fix init-flt-offsets to mask FLT attributes. Now it finds FW & Feature-key. * Add NVRAM backup Sector. Add validate-nvram at probe time to fix corruption. Version 2.05 03/26/09 * Change all FLT Flash offset parameters from constants to values. Version 2.04 12/03/08 * Add debug message to init-flt-offsets " Init FLT offsets" for ISP2500 only. * Add FLT and FDT Flash access methods * Remove set-bootid, set-boot-wwn, & releated qla only words from IBM version. * Added IBM debugging to BOFM words and set debug?=C00 if diag-switch is true. * Added max-payload bridge fix for 4-port QMI2564 HBA. Used Gil's method. * Fix get-mail to handle Response-Queue interrupts (stat=13) & add debugging. * Removed all Serial-Link-Control access/modify words from ISP2500 only. * Fix open to always return -1. Returning link-down fw-state fails on Serengetti 2. Known Issues None 3. Notices Information furnished in this document is believed to be accurate and reliable. However, QLogic Corporation assumes no responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its use. QLogic Corporation reserves the right to change product specifications at any time without notice. Applications described in this document for any of these products are only for illustrative purposes. QLogic Corporation makes no representation nor warranty that such applications are suitable for the specified use without further testing or modification. QLogic Corporation assumes no responsibility for any errors that may appear in this document. 4. Contacting Support For further assistance, contact QLogic Technical Support at: http://support.qlogic.com Trademarks Accelera, Accelerating Cluster Performance, InfiniCon Systems, InfiniNIC, InfiniPath, InfiniView, QLA, QLogic, the QLogic logo, ReadyPath, SANdoctor, SANsurfer, and SilverStorm are registered trademarks of QLogic Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners. (c) Copyright 2014. All rights reserved worldwide. QLogic, the QLogic logo, and the Powered by QLogic logo are registered trademarks of QLogic Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners.